All Categories
all-categories
Available on all Vooner FloGard® liquid ring vacuum pumps.
When incorporating an isolated bearing design, Vooner FloGard® pumps provide a re-lubrication schedule that extends to 36 months or more - significantly longer than standard industry intervals. The result: dramatic savings in bearing-related expenses. /Asset/a1006.jpg
A self-cleaning gravity strainer can be located ahead of the cooling tower to remove debris retained on a 100 mesh screen.
Improves Performance of Vacuum Pumps /Asset/a1007.jpg
The oil lubricated "Ball-Reverser" design has three balls in tracks in a ball reverser screw. The actuator can develop 1000 lbs of thrust. Length of stroke is fixed as determined by the length of screw flights installed in the unit.
Split bearings with UHMW Polyethylene liners and anti-rotation bars keep the shower in correct position and allow removing the shower from the paper machine and replacing it again without realigning the bearings. /Asset/a1013.jpg
The oil lubricated "Ball-Reverser" design has three balls in tracks in a ball reverser screw. The actuator can develop 1000 lbs of thrust. Length of stroke is fixed as determined by the length of screw flights installed in the unit.
Split bearings with UHMW Polyethylene liners and anti-rotation bars keep the shower in correct position and allow removing the shower from the paper machine and replacing gain without realigning the bearings. /Asset/a1017.jpg
Automated Shower Brush Rotation Systems
Cleans nozzles and inside of shower pipe and automatically flushes out the debris. Reliable protection from plugged nozzles tailored to shower water quality. Programmable cleaning cycle and manual activation. /Asset/AUTOMATED-BRUSH-ROTATION-SYSTEM-P.png Bearing Lubricators
Bearing Protection Option Provides Maintenance-Free Service For Three YearsAvailable on all Vooner FloGard® liquid ring vacuum pumps.
When incorporating an isolated bearing design, Vooner FloGard® pumps provide a re-lubrication schedule that extends to 36 months or more - significantly longer than standard industry intervals. The result: dramatic savings in bearing-related expenses. /Asset/a1006.jpg
Vooner Conical Port Liquid Ring Vacuum Pumps
(42) Vooner VG and V4 Series Vacuum Pumps are single stage liquid sealed, non-pulsating, rotary devices. The pumps are equipped with two conical ports and a one piece enclosed rotor, dynamically balanced, and keyed to the shaft. The rotor has a shroud in the center and the rotor housing has a rib in the center effectively providing two separate pumps with an inlet and discharge port located in each end head. The end heads are independently bolted to the rotor housing - no tie rods are used. A self-aligning removable bearing carrier bolts to each head. Shaft sealing is provided by braided packing with two-piece cast 316 stainless steel packing glands, studs and nuts. /Asset/VoonerLogo-FINAL Logo-OL.jpg Cooling Towers with Gravity Strainer
Warmer ambient temperatures can cause your vacuum pump seal water temperature to rise significantly in recirculating systems producing a loss of pump capacity. These temperatures can reach as high as 125 ºF in many applications. Adding a cooling tower can bring the seal water temperature down to 80-90 ºF and improve vacuum pump performance by approximately 10-15%.A self-cleaning gravity strainer can be located ahead of the cooling tower to remove debris retained on a 100 mesh screen.
Improves Performance of Vacuum Pumps /Asset/a1007.jpg
Dolphin™ Shower Actuators
The Dolphin™ Actuator is a basic model in a series of highly specialized shower actuators optimized for their respective range of applications. The oil lubricated "Ball-Reverser" design has three balls in tracks in a ball reverser screw. The actuator can develop 1000 lbs of thrust. Length of stroke is fixed as determined by the length of screw flights installed in the unit. Dimensions are identical to the ROLLTECH® Actuator. /Asset/a1009.jpg ROLLTECH® Shower Actuators
The ROLLTECH® Actuator is the basic model in a series of highly specialized shower actuators optimized for their respective range of applications. The advanced "Rollnut" technology has a roller package that rides in single helical groove on the shaft providing a line contact arrangement versus a point contact as in a ball reverser screw design. Efficiency remains constant at a high level at varying load requirements. /Asset/a1011.jpg General Morgan™ Shower Actuators
The General Morgan™ Actuator ( formerly SRA-2000) is the original model in a series of highly specialized shower actuators optimized for their respective range of applications.The oil lubricated "Ball-Reverser" design has three balls in tracks in a ball reverser screw. The actuator can develop 1000 lbs of thrust. Length of stroke is fixed as determined by the length of screw flights installed in the unit.
Split bearings with UHMW Polyethylene liners and anti-rotation bars keep the shower in correct position and allow removing the shower from the paper machine and replacing it again without realigning the bearings. /Asset/a1013.jpg
SRA-5000™ Shower Actuators
The SRA-5000™ Actuator is an industry standard in a series of highly specialized shower actuators optimized for their respective range of applications.The oil lubricated "Ball-Reverser" design has three balls in tracks in a ball reverser screw. The actuator can develop 1000 lbs of thrust. Length of stroke is fixed as determined by the length of screw flights installed in the unit.
Split bearings with UHMW Polyethylene liners and anti-rotation bars keep the shower in correct position and allow removing the shower from the paper machine and replacing gain without realigning the bearings. /Asset/a1017.jpg
Osprey™ Gravity Strainers
(6)- No trapping or driving solids through screen openings.
- Fibers that "staple" are continuously removed by bottom up spray showers.
- Easy visual performance check, inspection and infrequent maintenance. (1-2/years)
- Performance can be "Fine Tuned" (variable speed motor) for change in concentration or flow rate.
- Easy to install, self-contained modular unit.
- Small floor space compared to a number of inline strainers.
Standard Full Flow Seal Water Control Systems
(7) The Standard Full Flow Sealing Liquid Control System is offered as an option for each Vooner liquid ring vacuum pump. This package includes the components necessary to properly regulate sealant flow to the vacuum pump. If this option is chosen, the pump will be shipped with the sealing liquid control system assembled and pre-piped to the vacuum pump. /Asset/Standard-Full-Flow-Seal-Water-Control-Systems.jpg
VDSS Series Discharge Separators
(10) The Vooner VDSS Separator-silencers provide up to 99% air/water separation while significantly reducing the noise output from the vacuum pump. Vooner silencers are available in carbon steel, 304 and 316 stainless steels. /Asset/VoonerLogo-FINAL Logo-OL.jpg Vooner VaneGard® VG20 Liquid Ring Vacuum Pumps
(21) /Asset/Vooner-Vanegard--Liquid-Ring-Vacuum-Pumps-Inlet-and-Discharge-Manifold-Drawings.jpg Vooner VaneGard® VG30 Liquid Ring Vacuum Pumps
(21) /Asset/Vooner-Vanegard--Liquid-Ring-Vacuum-Pumps-Inlet-and-Discharge-Manifold-Drawings.jpg Vooner VaneGard® VG3 Liquid Ring Vacuum Pumps
(10) /Asset/Vooner-Vanegard--Liquid-Ring-Vacuum-Pumps-Inlet-and-Discharge-Manifold-Drawings.jpg Vooner VaneGard® VG40 Liquid Ring Vacuum Pumps
(21) /Asset/Vooner-Vanegard--Liquid-Ring-Vacuum-Pumps-Inlet-and-Discharge-Manifold-Drawings.jpg Vooner VaneGard® VG4 Liquid Ring Vacuum Pumps
(15) /Asset/Vooner-Vanegard--Liquid-Ring-Vacuum-Pumps-Inlet-and-Discharge-Manifold-Drawings.jpg 
